Customer Rating: 
Summary: Came Fast and Worked as Promised
Comment: Bought the mount and it came within a week. It comes with extra arms of different sizes to ensure you can mount your projector and I actually HAD to use the smaller arms it came with. I 'could' have gotten it to work with the longer arms but the convieniance of the smaller arms mades this a 5 star product. Plenty of hardware to get this mounted, including a cement kit so long as you can drill into the brick/cement and know how to use the anchors.
Customer Rating:
Summary: Good looking and a sturdy mount
Comment: After reading reviews I was thinking it would be difficult to install and align, once you have planned what needs to be done job becomes easy. I used the mount for my Dell 2300MP and the hardware for the projector comes in a seperate cover.
I would recommend to do a dry run how you will be aligning before you put it to the ceiling as it becomes hard later to align. Also remember not all projector have their lens in the center, so don't center the mount in the middle of the ceiling.
Don't tighten the nuts and bolts until you are 100% satisfied with the alignment.
Customer Rating:
Summary: works with mits hc4900
Comment: solid little bracket, all the adjustments you'll need, great price and comes with many sizes of screws. works well with my mitsubishi hc4900 right out of the box.
Customer Rating:
Summary: Good solid bracket
Comment: This is a very solid bracket. It mounts easily onto the ceiling and on to a special cradle that I made to support my projector. The cradle allows me to remove the projector from the ceiling position in under10 seconds. Although the bracket is designed to fix to the projector, it would be much more complicated to remove the projector without my cradle being used. However, the bracket allows me to position the cradle in the exact position needed and is easy t6o adjust in all of the required directions.
Customer Rating:
Summary: THIS IS A GREAT UNIT- I have rarely found a better projector mount
Comment: From reading other reviews I thought these would be ok, but not great and most likly requiring parts.
But to my suprise, these unit came with every imaginable nut, bolt, screw, etc.
The assembally process is easy and streight forward, and they are rock solid once you tighten the top locking bolt.
I run an A/V rental house and I have rarely found a better projector mount for todays small light weigth DLP projectors.
Great mount for the dollar, still a good option at twice the price.
Summary: Came Fast and Worked as Promised
Comment: Bought the mount and it came within a week. It comes with extra arms of different sizes to ensure you can mount your projector and I actually HAD to use the smaller arms it came with. I 'could' have gotten it to work with the longer arms but the convieniance of the smaller arms mades this a 5 star product. Plenty of hardware to get this mounted, including a cement kit so long as you can drill into the brick/cement and know how to use the anchors.
Customer Rating:
Summary: Good looking and a sturdy mount
Comment: After reading reviews I was thinking it would be difficult to install and align, once you have planned what needs to be done job becomes easy. I used the mount for my Dell 2300MP and the hardware for the projector comes in a seperate cover.
I would recommend to do a dry run how you will be aligning before you put it to the ceiling as it becomes hard later to align. Also remember not all projector have their lens in the center, so don't center the mount in the middle of the ceiling.
Don't tighten the nuts and bolts until you are 100% satisfied with the alignment.
Customer Rating:
Summary: works with mits hc4900
Comment: solid little bracket, all the adjustments you'll need, great price and comes with many sizes of screws. works well with my mitsubishi hc4900 right out of the box.
Customer Rating:
Summary: Good solid bracket
Comment: This is a very solid bracket. It mounts easily onto the ceiling and on to a special cradle that I made to support my projector. The cradle allows me to remove the projector from the ceiling position in under10 seconds. Although the bracket is designed to fix to the projector, it would be much more complicated to remove the projector without my cradle being used. However, the bracket allows me to position the cradle in the exact position needed and is easy t6o adjust in all of the required directions.
Customer Rating:
Summary: THIS IS A GREAT UNIT- I have rarely found a better projector mount
Comment: From reading other reviews I thought these would be ok, but not great and most likly requiring parts.
But to my suprise, these unit came with every imaginable nut, bolt, screw, etc.
The assembally process is easy and streight forward, and they are rock solid once you tighten the top locking bolt.
I run an A/V rental house and I have rarely found a better projector mount for todays small light weigth DLP projectors.
Great mount for the dollar, still a good option at twice the price.
Atdec TH-WH-PJ-FM Telehook Universal Projector Flush Mount Reviews: Page 3 of 6
1 | 2 | 3 | 4 | 5 | 6 |
1 | 2 | 3 | 4 | 5 | 6 |